LIFELIKE SOUND FOR THE SOUL.
Each and every Evolution Acoustics model undergoes years of testing and research before ever reaching the market to ensure optimum performance and value.
All Evolution Acoustics loudspeakers are designed in the USA. All aspects of our loudspeakers are painstakingly researched and analyzed to produce incredible micro and macro dynamic performance as well as the highest level of clarity in the industry. Only the finest parts are used throughout including reference grade film and foil capacitors, Goertz high purity copper foil inductors, Mills ultra high current 1% tolerance wire wound resistors, and Teflon insulated solid core copper wiring. All of these parts are hand matched and soldered point to point in our constant voltage crossover circuits without the use of thin PCB traces, which restricts current flow.
Clarity and dynamics are achieved through the use of ultra high quality pure ribbon tweeters, ceramic midrange drive units, optimized custom subwoofers, and ICE Power amplifiers. These components are housed in advanced acoustic cabinetry, which is both structurally inert and sonically diffuse through the use of multiple layer construction. Because the layers are individually bonded by an adhesive compound, the cabinet walls have superior strength, and the differing size of each layer produces an internal environment similar to an anechoic chamber, which significantly reduces back wave reflections from the transducers. You will also fall in love with the beauty of these speakers as they are hand finished in the same world class facility that produces some the finest guitars available today. Best of all these speakers are completely user adjustable to suit both personal tastes and acoustic environment. Combine all of these elements with an engineering target that is both time and phase aligned and you have one remarkable speaker system.
Over four decades of engineering research and expertise from some of the brightest minds in audio today went into the design of the Evolution Acoustics interconnects, speaker cables and power cords. Each cable model undergoes years of testing and research before ever reaching the market to ensure optimum performance and value, whether you own the first pair or the 1000th.
All Evolution Acoustics cables are designed, engineered, handcrafted, and assembled in the USA. Every aspect of our cables are painstakingly researched and analyzed to produce incredible micro and macro dynamic performance as well as the highest level of clarity in the industry. Only the finest parts are used throughout including Teflon insulated solid core high purity copper wire and silver rhodium terminations. In addition, all termination and junction housings are custom built by hand utilizing constrained-layer damping techniques to reduce unwanted micro phonics.
Due to the extreme engineering behind these cables, proper burn in will begin to occur after several hundred hours. These are probably some of the heaviest and largest cables in the industry with an extraordinary amount of copper. Therefore, be patient, because when adequately broken in their performance is sublime.
To find a dealer or to setup an audition:
In North America, please contact Jonathan Tinn at:
Blue Light Audio
4160 SW Greenleaf Drive
Portland, Oregon 97221
Tel: (503) 868-0500
info at bluelightaudio.com
In most of Asia, please contact Tommy Ho at:
Shanghai Li Min Audio
Room 2328,2 Block No. 585
Zhongshan North Road
Shanghai, China 200070
Tel: +86 2156317880
jmaudio123 at gmail.com
In Australia, please contact Boris Granovsky at:
Absolute Hi End
PO Box 370
Ormond, Vic 3204
Tel: +61 (0) 488777999
absolutehiend at gmail.com
In France, please contact Julien Valiere at:
Chemin de la Mine
30140 Saint-Felix de Pallieres / France
Tel: +33 04 66 60 79 14
info at epectaz.com
In Switzerland and other European countries not listed, please contact Hervé Deletraz at:
2 Ch. Louis-Hubert
CH-1213 Petit-Lancy / Geneva
Tel: +41 22 793 8284
rehve at dartzeel.com